Page 5 - Vestil Catalog 112

11
Edge-O-Dock Levelers

Edge-O-Dock Levelers permanently attach to the face of dock. It is recommended for
docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops
automatically behind the face of the bumpers. Concrete recess is not required. It comes
complete with two (2) 2" x 8" x 18" bumpers and installation instructions. Standard
ramping is 29" (29-13/16" with 30,000 lb. capacity), with a 36-5/8" long ramping length available
for smaller grade. A steel dock edge or approach ramp is required for proper installation. LOADING DOCK EQUIPMENT
The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket
of the inner lip and pulling down toward the floor. The operator then pushes the handle
forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind
the bumper face automatically.
The Hydraulic Hand Pump system is used to lift the leveler and extend the lip. The
operator rotates the relief valve allowing the deck to descend down and rest upon the
trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of
hydraulic line and oil. Truck must pull out for leveler to return to stored position.
The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed
against the dock, push and hold the control button. The leveler raises and the lip will
extend. 115V, 1-phase power standard. Unit comes complete with motor, pump, control
box, cylinder, lines, and oil. Truck must pull out for leveler to return to stored position.

MODEL **USABLE UNIFORM WEIGHT MECHANICAL • series FM
NUMBER OPERATION WIDTH CAPACITY (POUND)
FM-0648 MECHANICAL 48" 6,000 lb. 348
FM-2066� MECHANICAL 66" 20,000 lb. 514
FM-2072� MECHANICAL 72" 20,000 lb. 523
FM-2078 MECHANICAL 78" 20,000 lb. 560
FM-2566� MECHANICAL 66" 25,000 lb. 556
FM-2572� MECHANICAL 72" 25,000 lb. 575
FM-3066 MECHANICAL 66" 30,000 lb. 663
FM-3072 MECHANICAL 72" 30,000 lb. 709
PP-1572-36* HAND PUMP 72" 15,000 lb. 752
PP-2066 HAND PUMP 66" 20,000 lb. 583
PP-2072 HAND PUMP 72" 20,000 lb. 627
PP-2566 HAND PUMP 66" 25,000 lb. 622
PP-2572 HAND PUMP 72" 25,000 lb. 671 HYDRAULIC HAND PUMP
series PP
PP-2572-36* HAND PUMP 72" 25,000 lb. 1168
PP-3066 HAND PUMP 66" 30,000 lb. 998
PP-3072 HAND PUMP 72" 30,000 lb. 1061
PE-1572-36* ELECTRIC 72" 15,000 lb. 749
PE-2066 ELECTRIC 66" 20,000 lb. 581
PE-2072 ELECTRIC 72" 20,000 lb. 601
PE-2566 ELECTRIC 66" 25,000 lb. 619
PE-2572 ELECTRIC 72" 25,000 lb. 649
PE-2572-36* ELECTRIC 72" 25,000 lb. 826
PE-3066 ELECTRIC 66" 30,000 lb. 745
PE-3072 ELECTRIC 72" 30,000 lb. 782
*36 DENOTES RAMP LENGTH OF 36-5/8" FOR SMALLER GRADE
**OVERALL WIDTH IS USABLE WIDTH PLUS 27" ELECTRIC HYDRAULIC • series PE
OPTIONAL STEEL FACE FOR BUMPER, model EOD-SF
115V 1-PHASE STANDARD

EDGE-O-DOCK LEVELER OPTIONS
MODEL WEIGHT
NUMBER DESCRIPTION (POUND)
FM-HOOK PULLING HOOK FOR MECHANICAL UNIT (OLD STYLE) 3
FM-BAR ACTUATION HANDLE FOR MECHANICAL UNIT 13
BB� STEEL BUMPER BOX 75
RB RUBBER BUMPER (REPLACEMENT), 18"W x 8"H x 2"P 16
FM-FM FM-SERIES (HOOK STYLE) TO FM-SERIES (HANDLE STYLE) CONVERSION KIT 12
FM-PP FM-SERIES TO PP-SERIES CONVERSION KIT 53 CONTROL BOX
FM-PE FM-SERIES TO PE-SERIES CONVERSION KIT 89
PP-PE PP-SERIES TO PE-SERIES CONVERSION KIT 56
CE� CURB EDGE - 6" CHANNEL x 96" LONG 90
CED CANTED EDGE --
RAMP-2� APPROACH RAMP 96"W x 12"L x 2"H 120
RAMP-4� APPROACH RAMP 96"W x 24"L x 4"H 215
AP� APPROACH PLATE ¼" THICK x 12"L x 96"W 132
AP-BE� APPROACH PLATE ¼" THICK x 12"L x 96"W WITH BEVELED EDGE 130